How to improve transactional email deliverability and keep it out of spam
Updated:
To keep transactional email out of spam, authenticate your domain with SPF, DKIM and DMARC, send transactional mail apart from marketing mail, stop sending to addresses that bounce or complain, and keep your Gmail spam rate below 0.3%, ideally below 0.1%. Then watch your reputation in Google Postmaster Tools. These steps follow the rules Gmail, Yahoo and Outlook.com publish for senders, and when a password reset lands in spam they are the first things to check.
Why transactional emails go to spam
Mailbox providers judge every message by who sent it and how that sender has behaved. Google’s email sender guidelines (opens in a new tab) check authentication, reverse DNS, TLS, message format and the rate of spam reports. Reputation is shared too: Google notes that on a shared IP address, the activity of every sender affects the reputation of all of them. Transactional mail inherits any problem on its domain or IP.
| Cause | What to check |
|---|---|
| Missing or failing authentication | SPF, DKIM and DMARC pass, and DKIM signs with your own domain |
| Mixed streams | Marketing mail does not share the IP, domain or From address of your resets and receipts |
| Bad addresses | Hard bounces and complaints are suppressed, not retried |
| High spam rate | Postmaster Tools shows a rate below 0.3% |
| Poor IP reputation | The shared pool or dedicated IP has a good record and steady volume |
| Promotional content | Receipts and resets carry no offers |
Step 1: Authenticate your domain
Publish SPF and DKIM for the domain you send from, then a DMARC record with at least p=none. Gmail requires SPF or DKIM from every sender and all three from anyone sending more than 5,000 messages a day to Gmail accounts. Yahoo sets the same rules, and Outlook.com requires SPF, DKIM and DMARC from domains sending over 5,000 a day.
Make sure DKIM signs with your domain, not the service’s. DMARC needs SPF or DKIM to align with your From address, and at many services DKIM is the record that aligns. Amazon SES, for example, passes DMARC through DKIM alignment when you keep its default MAIL FROM domain. Our SPF, DKIM and DMARC setup guide lists the records each service asks for. Google’s sender FAQ also says all mail from your primary domain and its subdomains counts toward the 5,000 a day, and that bulk sender status does not expire.
Step 2: Separate transactional and marketing mail
Keep password resets and receipts on a different stream from newsletters, so complaints about marketing do not drag down the mail people are waiting for. Yahoo’s sender best practices (opens in a new tab) advise against sending bulk or marketing mail from the IPs you use for transactional mail and alerts. Google says to use a different IP for each message type if you send from several, and the same From address within each category.
Several services build this split in, according to their documentation:
- Postmark runs transactional and broadcast mail on separate message streams with separate SMTP hosts, and keeps suppressions per stream.
- Mailtrap has a transactional stream and a Bulk Stream on its own host,
bulk.smtp.mailtrap.io, with suppression lists per domain and per stream. - Amazon SES tenants each get their own identities, reputation and optional suppression list, which suits SaaS apps that send for many customers.
- Zoho CPaaS (ZeptoMail) separates sending by app or purpose with Agents and accepts transactional mail only.
A sending subdomain helps too. Resend recommends sending from a subdomain, and Loops suggests one such as mail.yourcompany.com. Google’s guidelines also say not to mix content types, so keep promotions out of sales receipts.
Step 3: Clean your list and use suppression
Transactional lists build themselves from signups, so typos and fake addresses get in. Confirm each address when the user signs up, and let your service suppress addresses that hard bounce or complain. Google’s guidelines say to confirm each recipient’s address and to unsubscribe recipients automatically after multiple bounces. Microsoft asks high-volume senders to remove invalid addresses regularly.
Most services keep a suppression list for you. Loops suppresses hard bounces and complaints automatically, and Postmark and Mailtrap keep suppressions per stream. Plan for what your app does when a reset goes to a suppressed address: the service will not deliver it, so show the user a message and let them correct the address.
Step 4: Handle bounces and complaints
Keep your spam rate in Postmaster Tools below 0.3% and aim for below 0.1%, as Google advises. Google’s sender FAQ says bulk senders above 0.3% lose eligibility for mitigation until they stay below it for 7 days in a row. Yahoo also sets 0.3%. Read bounce and complaint events from your service’s webhooks and stop sending to those addresses.
Services enforce limits of their own, and going over them can pause your sending:
- Resend asks for a bounce rate under 4% and a spam rate under 0.08%, or sending may be paused.
- SendPulse cuts an account to 50 emails an hour when bounces pass 7% over the last 15 minutes of sending.
- Zoho CPaaS (ZeptoMail) requires a bounce rate under 5% and a spam rate under 0.1% before it grants a dedicated IP.
Amazon SES has no direct HTTP webhook. It publishes bounce and complaint events through Amazon SNS, EventBridge and other AWS services, so plan that setup before launch.
Step 5: Choose a shared or dedicated IP
A dedicated IP gives you a reputation of your own, but only steady volume keeps it warm. Below the levels the services set, a shared IP from a well-run service is the usual choice. Postmark requires 300,000 emails a month, Resend warns that under 90,000 a month may not keep an IP warm, and Zoho asks for 10,000 a day. Google’s guidelines say to start with a low volume and increase it slowly.
What each service documents for dedicated IPs:
| Service | When it is available | Price per IP |
|---|---|---|
| Amazon SES | Any plan, including à la carte | $24.95 a month |
| Bird Email (SparkPost) | From the Growth plan | $24.95 a month |
| Brevo | Add-on on Professional, 1 included on Enterprise | Not published |
| Mailchimp Transactional | Add-on on any paid plan | $29.95 a month |
| MailerSend | Professional and Enterprise | $50 a month |
| Mailgun | Included from the 100,000-email Foundation plan | Extra IPs $59 a month |
| Mailjet | On request from Premium 100,000 | Not published |
| Mailtrap | Business and Enterprise, reviewed per request | Included |
| Postmark | Pro or Platform, 300,000 emails a month or more | $50 a month |
| Resend | Scale plan, over 3,000 emails a day | $30 a month |
| SendGrid | 1 included with Pro and Premier | Extra IPs $30 a month |
| SendPulse | Included from the 100,000-email subscription | Included |
| SMTP2GO | Included from 100,000 emails a month | Extra IPs $19 a month |
| SocketLabs | 1 included from Pro 100k | Included |
| Zoho CPaaS (ZeptoMail) | 10,000 emails a day or more | $30 a month, billed annually |
Warm-up takes time. Postmark says its managed warm-up typically takes 3 to 6 weeks, Mailtrap about 3 weeks and Bird about 30 days. MailChannels does not offer dedicated IPs and sends from shared pools. See the best transactional email services to compare these services on price.
Step 6: Keep content and headers clean
Format messages to RFC 5322, as Gmail and Yahoo require, and send from an address on your own domain that accepts replies, which Microsoft asks of high-volume senders. Keep each message to one purpose. Google says not to include promotions in sales receipts, and the FTC treats a receipt that leads with an offer as a commercial message.
A few habits help transactional mail in particular:
- Use the same From address for each type of message, as Google advises.
- Write subject lines that say what the message is, such as “Reset your password”.
- Keep link domains consistent with your sending domain. Mailtrap’s docs warn that links to unverified domains you own can get mail treated as phishing.
- Leave marketing footers off transactional mail. Our guide to what transactional email is covers when an unsubscribe link is required.
Step 7: Monitor with Google Postmaster Tools
Google Postmaster Tools (opens in a new tab) shows how Gmail sees your mail: spam rate, IP and domain reputation, authentication pass rates, encryption, delivery errors and whether you meet the sender requirements. Add your DKIM or return-path domain, verify it with a TXT or CNAME record, and check it weekly. Its data covers only mail sent to personal Gmail accounts.
Google’s setup page (opens in a new tab) notes that dashboards can show missing data on days when volume is low. Pair Postmaster Tools with DMARC aggregate reports, which show every source sending as your domain. Some services add monitoring of their own: Postmark and MailerSend offer DMARC monitoring, MailerSend adds blocklist monitoring, and Mailtrap includes reputation monitoring from its Business plan. The Postmark review, Amazon SES review and Resend review cover each service’s deliverability features in full.
Frequently asked questions
Why are my password reset emails going to spam?
Check three things first: SPF, DKIM and DMARC on your sending domain, whether the resets share an IP or domain with marketing mail that draws complaints, and your spam rate and reputation in Google Postmaster Tools.
What spam complaint rate is too high?
Google asks senders to stay below 0.3% in Postmaster Tools and recommends staying below 0.1%, and Yahoo also sets 0.3%. Some services set lower limits of their own, such as Resend’s 0.08%.
Do I need a dedicated IP for transactional email?
Only at high, steady volume. Postmark requires 300,000 emails a month for one, and Resend warns that under 90,000 a month may not keep an IP warm. Below that, a shared IP from a well-run service is the usual choice.
Should transactional and marketing emails be sent separately?
Yes. Yahoo advises against sending marketing mail from the IPs you use for transactional mail, and Google says to use a different IP for each message type if you use several. Postmark and Mailtrap run separate transactional and bulk streams for this.
Does Google Postmaster Tools show transactional email?
It shows all mail your domain sends to personal Gmail accounts, transactional mail included. Data can be missing on days when you send too little for Google to report it.
Sources
Prices and features come from each vendor's own pages, and other facts from the pages listed here, read on the dates shown. Prices exclude sales tax.
- Email sender guidelines (Gmail Help) (opens in a new tab), read November 18, 2026
- Email sender guidelines FAQ (Gmail Help) (opens in a new tab), read November 18, 2026
- Set up Postmaster Tools (Gmail Help) (opens in a new tab), read November 18, 2026
- Postmaster Tools dashboards (Gmail Help) (opens in a new tab), read November 18, 2026
- Sender Best Practices (Yahoo Sender Hub) (opens in a new tab), read November 18, 2026
- Strengthening Email Ecosystem: Outlook's New Requirements for High-Volume Senders (Microsoft) (opens in a new tab), read November 18, 2026